如下為我司愛澤工業IZE_Industries本月到貨MTL相關產品，歡迎致電索取樣本資料和產品信息。
MTL隔離模塊MTL5532 MTL MTL隔離模塊MTL4549C
MTL安全隔離柵MTL7761PaC MTL安全隔離柵MTL7766Pac
MTL接口模塊MTL4851 MTL接口模塊MTL4852
MTL浪涌保護模塊SD07R MTL浪涌保護器TP48-N-NDI
MTL電源模塊F860-2 MTL浪涌保護模塊ZB24571
MTL背板CPY-C3-RAI841-H8 MTL背板CPY-C3-ADV151
MTL隔離模塊MTLx532系列介紹
MTLx532 可隔離位于危險區域的開關、接近檢測器、電流脈沖變送器或電壓脈沖變送器的脈沖信號。它通過將脈沖信號重復發送到安全區域，非常適合需要高脈沖頻率和快速響應時間的應用。此外，它還提供一個與頻率成比例的模擬輸出和一個繼電器輸出，該繼電器輸出可配置為報警信號。配置可通過個人電腦完成。
The MTLx532 isolates pulses from a switch, proximity detector, current pulse transmitter or voltage pulse transmitter located in a hazardous area. It is ideal for applications involving high pulse rates and fast response times, by repeating the pulses into the safe area. An analogue output proportional to frequency is also provided, together with a relay output, which may be configured to act as an alarm. Configuration is carried out with a personal computer.
MTL隔離模塊MTLx549系列介紹
MTLx549 模塊可接收來自安全區域控制器的 4/20mA 浮動信號，用于驅動危險區域內的兩個電流/壓力轉換器（或任何其他最大阻抗為 800Ω 的負載）。對于 HART 閥門定位器，該模塊還支持數字通信信號的雙向傳輸。具有回讀功能的過程控制器可以檢測現場線路中的開路或短路：如果發生這種情況，流入端子的電流將降至預設值。
The MTLx549 accepts 4/20mA floating signals from safe-area controllers to drive 2 current/pressure converters (or any other load up to 800?) in a hazardous area. For HART valve positioners, the module also permits bi-directional transmission of digital communication signals. Process controllers with a readback facility can detect open or short circuits in the field wiring: if these occur, the current taken into the terminals drops to a preset level.
MTL安全柵MTL7700系列介紹
MTL7700 系列本質安全型無源網絡器件以其品質和可靠性熟知，采用齊納二極管，電阻器和熔斷器，可將多余的電能安全地導入地線，防止危險區域設備產生火花或過熱。這有助于確保安全的工作環境，并保護附近人員免受爆炸風險。
MTL7700 是一款 DIN 導軌安裝式安全柵，無需特殊硬件即可快速輕松地安裝。可拆卸端子便于安裝和維護，只需從模塊側面拔下端子即可斷開回路。此外，線纜入口采用傾斜設計，方便在空間有限的機柜內進行布線。
MTL7700 安全柵可輕松牢固地夾在標準 T 型 DIN 導軌上，同時形成可靠的 IS 接地連接。
對于需要為開關輸入或兩線制變送器提供現場電源的應用，MTL7700 系列提供總線供電功能。與 MTL7798 電源饋送模塊配合使用時，用戶無需額外接線即可為多個屏障提供保護的電子熔斷電源。
Known for its quality and reliability, the MTL7700 range of intriniscally safe passive network devices use Zener diodes, resistors and fuses to safely divert excess electrical energy to ground and prevent sparking or overheating of equipment in hazardous areas. Helping to ensure a safe work environment and protects those nearby from explosion risks.
As a DIN rail mounting barrier, the MTL7700 provides quick and easy installation without the need for special hardware. Removable terminals are used for ease of installation, maintenance and for providing a loop disconnect by simply unplugging the terminals from the side of the module. Wire entry is also angled to assist wiring within limited space enclosures.
MTL7700 barriers clamp simply and securely onto standard T-section DIN rail, simultaneously making a reliable IS earth connection.
For applications where field power is required for switch inputs or 2-wire transmitters, the MTL7700 range provides a bussed power feed facility. When used in conjunction with the MTL7798 power feed module the user has a fully protected, electronically fused supply to many barriers with no additional wiring required.
MTL浪涌保護器SD系列介紹
SD 系列浪涌保護器具備較高的封裝密度、多樣的應用場景、性能穩定的混合電路、便捷的安裝方式，且支持可選的 “回路斷開" 功能，適用于過程設備、I/O 系統和通信網絡的浪涌保護需求。
• 一系列獲得ATEX認證的本質安全型浪涌保護器
• 超薄設計，節省空間；安裝簡便
• 多級混合保護電路 – 最大浪涌電流20kA
• 多種電壓等級 – 適用于所有過程I/O應用，并兼容HART協議
• 提供高帶寬、低阻抗、RTD、PSTN和三線制變送器版本
The SD range is a series of surge protection devices combine unparalleled packing densities, application versatility, proven reliable hybrid circuitry, simple installation and optional ‘loop disconnect’ facilities – features which make the range the ultimate surge protection solution for process equipment, I/O systems and communications networks.
• Range of ATEX Certified intrinsically safe surge protectors
• Ultra-slim space-saving design; easy installation
• Multistage hybrid protection circuitry – 20kA maximum surge current
• Range of voltage ratings – to suit all process I/O applications and HART Compatible
• High bandwidth, low resistance, RTD, PSTN and 3-wire transmitter versions available
MTL浪涌保護器TP48系列介紹
Crouse-Hinds MTL TP48 系列浪涌保護器可在關鍵位置（即設備端）保護現場安裝的過程變送器。安裝簡便（TP48 可旋入未使用的導管入口，無需任何額外改造），即可提供高級別的浪涌和瞬態保護，同時確保正常運行不受影響。
TP48 在每次操作后都會自動復位。該裝置提供多種螺紋接口，以適配不同的變送器，并針對危險區域提供防爆和本質安全型選項。最大工作電壓為 48V 直流，沖擊額定值為峰值電流 10kA，峰值電壓 10kV。
該裝置已獲得本質安全、防爆、防爆和非易燃性認證，適用于所有氣體組別和最高 T6 溫度等級。對于功能安全應用，TP24/7 浪涌保護器可作為線路組件，直接傳輸過程信號而不產生任何影響。功能安全手冊中提供了相關信息，以幫助選擇和應用 MTL 浪涌保護裝置，用于根據最新的 IEC 61508 和 IEC 61511 標準提供功能安全的儀器信號。
The Crouse-Hinds series MTL TP48 surge protection device safeguards field-mounted process transmitters where it matters, right at the unit. After a simple installation (the TP48 screws into an unused conduit entry, with no additional modification), it provides high-level protection against surges and transients while normal operation remains unaffected.
The TP48 resets itself automatically after each operation. The device is available with screw threads to suit different transmitters, with explosion-proof and intrinsically safe options for hazardous areas. Working voltage is 48V dc maximum with impulse ratings of 10kA peak current and 10kV peak voltage.
Approvals for intrinsically safe, flameproof, explosion-proof and non-incendive operation are available, in all gas groups and apparatus temperature classifications up to T6. For Functional Safety applications TP24/7 surge protection devices can be considered as wiring components that pass the process signals without alteration. Information is provided in the Functional Safety manual to assist in the selection and application of MTL surge protection devices for instrumentation signals that are being used to provide functional safety according to the latest IEC 61508 and IEC 61511 standards.
MTL浪涌保護器ZoneBarrier系列介紹
Crouse-Hinds MTL ZoneBarrier 系列是一款獨特的模塊化電信設備保護系統。ZoneBarrier 系列通過在不受控制的瞬態環境和寶貴的設備之間建立有效的屏障，保護用戶免受代價高昂的系統停機和設備故障的損害。
ZoneBarrier 系列采用先進的混合電路，可在不影響設備正常運行的情況下提供保護。ZoneBarrier 保護組件由固態過壓保護器（二極管）和正溫度系數 (PTC) 器件組合而成，形成三個獨立的保護階段。這種高品質浪涌保護組件的組合賦予 ZoneBarrier 系列獨特的低限壓和高浪涌電流容量，從而提供更好的保護性能。
所有常見的電信系統均可使用 ZoneBarrier 系列進行保護。ZoneBarrier 模塊適用于專線、數字數據服務、T1、E1 和雙線 ISDN，并提供多種連接類型。
The Crouse-Hinds series MTL ZoneBarrier range is a unique, modular protection system for tele-communication equipment. By providing an effective barrier between uncontrolled transient environments and your valuable equipment the ZoneBarrier range protects you from costly system down time and equipment failure.
The sophisticated hybrid circuitry employed by the ZoneBarrier range protects your equipment without impeding normal operation. ZoneBarrier protection components comprise of a combination of solid state overvoltage protectors (sidactors) and positive temperature coefficient (PTC) devices to form three distinct stages of protection. This combination of high quality surge protection components gives the ZoneBarrier range its characteristic low limiting voltage and high surge current capacity which provides excellent protection.
All common telecommunication systems can be protected by the ZoneBarrier range. ZoneBarrier modules are available for Leased Line, Digital Data Service, T1, E1 and 2-wire ISDN and are available with a range of connection types.
MTL常用型號：
MTL CPY-C3 AAI141
MTL CPY-C3-AA1543-H
MTL CPY-C3-AA1841
MTL CPY-C3-AAI141-HD
MTL CPY-C3-AAI841-HD
MTL CPY-C3-AAI841-Η
MTL CPY-C3-ADV151
MTL CPY-C3-ADV151-H8
MTL CPY-C3-ADV151-M
MTL CPY-C3-ADV151-S
MTL CPY-C3-ADV161
MTL CPY-C3-ADV551L-M
MTL CPY-C3-ADV551L-S
MTL CPY-C3-ADV551-M
MTL CPY-C3-RAI141
MTL CPY-C3-RAI141-H8
MTL CPY-C3-RAI543-H8
MTL CPY-C3-RAI841-H8
MTL F800-BLK
MTL F801
MTL F802
MTL F809F
MTL F860
MTL F860-2
MTL F860-CA
MTL FCAB-05
MTL FCAB-06
MTL FCAB-07
MTL FCAB-08
MTL MTL4532
MTL MTL4549
MTL MTL4549C
MTL MTL4549Y
MTL MTL4851
MTL MTL4852
MTL MTL5532
MTL MTL7710+/-
MTL MTL7715+
MTL MTL7715P+
MTL MTL7722+/-
MTL MTL7728+/-
MTL MTL7728aс
MTL MTL7728P+
MTL MTL7755ac
MTL MTL7756ac
MTL MTL7758+/-
MTL MTL7760ac
MTL MTL7761ac
MTL MTL7761Pac
MTL MTL7764+/-
MTL MTL7764ac
MTL MTL7765a
MTL MTL7766ac
MTL MTL7766Pac
MTL MTL7767+
MTL MTL7779+
MTL MTL7787+/-
MTL MTL7787P+
MTL MTL7788+
MTL MTL7788R+
MTL MTL7796+/-
MTL SD07R
MTL SD16
MTL SD16R
MTL SD16X
MTL SD32
MTL SD32R
MTL SD32X
MTL SD55R
MTL TP48-1
MTL TP48-3-G
MTL TP48-3-G-ANDI
MTL TP48-3-I
MTL TP48-3-I-ANDI
MTL TP48-3-N
MTL TP48-3-N-NDI
MTL TP48-4-G
MTL TP48-4-G-ANDI
MTL TP48-4-I
MTL TP48-4-I-ANDI
MTL TP48-4-N
MTL TP48-4-N-NDI
MTL TP48-G
MTL TP48-G-ANDI
MTL TP48-I-NDI
MTL TP48-N
MTL TP48-N-NDI
MTL ZB24501
MTL ZB24503
MTL ZB24504
MTL ZB24505
MTL ZB24525
MTL ZB24558
MTL ZB24562
MTL ZB24571
如果您需要完整的MTL的相關技術咨詢，請隨時致電愛澤工業，或者訪問網站,我們將盡全力解決您的問題。
If you have any question for MTL，please feel free to dial or browse our website.
